Molding rubbers and casting supplies
 
Art supplies home
Brushes for decorative painting
Natural sea sponges
Decorative Paint Supplies
   
 



Latex Blend & Glaze
Decorative Painting Liquid

A semi-translucent glazing and blending medium used to create faux finishes and decorative painting techniques. Mixes perfectly with interior latex paint, universal tints, or artist water colorants. Do not exceed 6 oz. of colorant. Mix ratio: 4 parts glaze to 1 part paint. Heavy bodied formula holds impressions and effects well and will not run or sag on vertical surfaces. Creates a nonyellowing finish that is washable and durable. Spreads and brushes easily and sets slowly for easy wiping and blending.
 

Quart $ 11.29

 

Architectural details and ornamentation!

Authentic Period moldings, ceiling medallions, cornices, columns and much more. All crafted in genuine plaster.
For commercial and residential environments.

Visit architecturalFX.com

 

Feature Tutorial

Color washing
A wonderful technique for both new and old walls. Create the look of time worn beauty with this simple decorative
color wash.

Learn the color recipe for this technique!

 

artSparx Special

Floetrol® Latex Paint Conditioner: Quart
Flood
Add to latex paints to improve flow and cover qualities.
SKU: 770817  
$5.49
 

 


Deco Art Weathered Wood 2 oz. bottle
Deco Art Weathered Wood
2 oz. bottle

Weathered Wood is a crackling medium which, when used with Americana Acrylics or Crafter's Acrylic, will achieve an aged, cracked, antiqued or distressed wood finish on most hard craft surfaces.

$ 1.41

Artists Supplies

Gilding Supplies: gold leaf

Artists Brushes

Artists Paints

Artist Supplies

Artist Books
Home Improvement

Paint and painting supplies

Tools and Hardware
Interior Accents

Fine Art Prints and Posters
Home Decor

Decorative items

Furniture

 

artSparx Books


The Artist's Handbook of Materials and Techniques
The Artist's Handbook of Materials and Techniques

Since 1940, when it was originally published, The Artist's Handbook has become indispensable for thousands of practicing artists and art students. The book has
remained continually in print through many editions and has sold more than a
quarter of a million copies. A detailed index makes a wealth of information
readily available. Charts and line drawings throughout.

more books


Ease release 200

Ease Release™ 200 is an excellent general purpose release agent for making molds and casting parts.  This product will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers.  Ease ReleaseE 200 is effective on aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds.

SingleCan = 12 oz. = $19.50

item: easerelease200

OOMOO-30

No Vacuuming – No Scale  OOMOO™ 25 & 30.  OOMOO™ 25 & 30 are easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary).  Both have very low viscosity for easy mixing and pouring, and vacuum degassing is usually not necessary.  Both products cures at room temperature with negligible shrinkage and have good tear strength.   OOMOO™ 30 has a 30-minute pot life, with a six-hour cure time.  OOMOO™ 25 is a faster version, with a 15-minute pot life and 75 minute cure time. 

Gallon Unit = 1 Gallon Pail Part A + 1 Gallon Pail Part B = 20.7 lbs. = $172.00

item: OOMOO-30/G

 

 

ArchitecturalFX.com

Whether you are restoring an old house or simply want to imitate the style of another era, www.architecturalFX.com is here to help.
Architectural ornamentation, ceiling medallions, columns and capitals, plus plaster tips, tutorials and professional installation resources that allows you to add distinction to even the most modest home.
 
Alumilite High Strength 3 RTV Mold Making Rubber 1 lb. HSIII RTV

 

 

$ 23.52

Alumilite High Strength 3 RTV Mold Making Rubber 1 lb.

HSIII mold rubber recreates minute details, is chemical resistant, very durable and easy to work with. HSIII is a high tear strength RTV rubber with exceptional flexibility and tear strength. Great for molds with deep undercuts. RTV mold rubber vulcanizes (cures) at room temperature in 24 hours. This kit contains enough catalyst and rubber base to mix 1 pound of mold making powder. You should get 30 to 50 parts per mold. Mold making instructions not included, recommended for advanced mold makers. Product specifications: Mix Ratio 10:1 Mixed Viscosity 150 Specific Gravity 1.16 Pot Life 2 hrs. Demold Time 24 hrs. Platinum/Tin Cure Tin Hardness 10 Color Pink Linear Shrink (%) .48 Tear Strength (ppi) 110 Elongation 575% Tensile Strength (psi) 400 Temperature Range (F) -67-392




 

Alumilite Quick-Set Mold Rubber Kit 1 lb. kit

Alumilite Quick-Set Mold Rubber Kit 1 lb. kit

Easy to use RTV Silicone Mold Making Rubber has an amazing four hour set time. Make reusable molds of sculptures, figurines, jewelry parts, scale models, woodcarving, etc. Excellent for use with Alumilite Super Liquid Casting Plastic.

$ 23.52




 

Smooth-On Smooth-On Universal Mold Release 14 fl oz. can

Smooth-On Smooth-On Universal Mold Release 14 fl oz. can

Universal Mold Release is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It releases casting materials from properly prepared rubber, plastic, and metal molds. Lengthens production life of rubber molds. 14 fl. oz. (net weight 12 oz. /341 grams.

$ 9.48


artSparx Book Special

Sculpture House Mold Making Casting And Patina Book  Mold Making Casting And Patina Book

Sculpture House Mold Making Casting And Patina Book

For the student sculptor. First edition soft cover publication with 116 pages and over 200 photos and line drawings of all basic mold making and casting procedures. Sculpture House.

$ 19.00


 

Apt II Mend-A-Mold 1 oz. mend-a-mold

Apt II Mend-A-Mold 1 oz.

Repairs broken plaster molds quickly and easily.

$ 3.46




 

Sculpture House Pliatex Mold Rubber quart bottle

$ 28.45

Sculpture House Pliatex Mold Rubber quart bottle

Pliatex molds capture the finest details and produce thousands of smooth, perfect casts. Pliatex molds may be stored indefinitely used whenever needed. Coat Mold Instructions: Apply two coats of shellac to entire model cut one to one with alcohol Divide 1/3 of model with clay shim Make key grove along entire length of clay and shellac Apply five thin coats rubber to one side of clay and inward 3 in. Let each coat dry thoroughly Remove clay, shellac exposed rubber, and apply separator Apply rubber to the remaining area of the model building up 15-30 coats or 1/8 in. thick Let mold cure two days to one week Apply Pliatex Separator liberally over dried rubber Build plaster mother mold around model and rubber When finished open and remove rubber from mold Replace rubber in bother mold and cast




 

Smooth-On Silicone Mold Making Rubber  OOMOO 30

 

$ 24.00

Smooth-On Silicone Mold Making Rubber

Use this silicone mold making rubber for making perfect reproductions of original models. It captures intricate detail and is easy to use. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring, and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For The Novice Mold Maker - OOMOO 30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO 30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins, and wax. Net weight 16 oz. (454 grams). Technical Information Mixing Ratio: One to One by volume (100A:130B by weight) Pot Life: 30 min. Demold: 6 hrs. Color: Lavender Properties (Part A and B Mixed) Viscosity: 4,250 cps G/CC: 1.34 Cu. In./Lb.: 20.6 Tensile Strength: 240 PSI Elongation At Break: 250% Die C Tear Strength: 40 pli Compression Set: 37% Shrinkage: .0025 in./in.




 

LifeCast Earthium Advanced LifeCast Medium  advanced casting kit

$ 18.00

LifeCast Earthium Advanced LifeCast Medium advanced casting kit

Cast in wax, plaster, plastic, or even chocolate. Earthium is a mold material for the advanced artist. It's nontoxic, nonallergenic, and biodegradable. This amazing two-part medium not only makes it possible to LifeCast faces while just holding your breath, but it captures every nuance of expression as well It can also be made slow enough to do entire bodies all at once.Kit contains two blend bags for preparing medium and one flexible straw. Makes up to 2 gallons. Safe and nontoxic. Complete instructions enclosed. Beginners may wish to start with .




 

Pacon Plast'r Craft Modeling Material 5 lb./assorted lengths

$ 20.76

Pacon Plast'r Craft Modeling Material 5 lb./assorted lengths

This plaster-impregnated gauze comes in a variety of lengths and widths enabling you to make unique items. Just cut strips to fit your project, wet them, and mold them around a base shape--Styrofoam, balloons, cardboard, crumpled newspaper, wire screens, jugs or bottles, and more. Plast'r Craft adheres to itself or any porous material. After it dries, sand smooth and paint. Instructions included. It's non-toxic and suitable for use with all ages.




 

LifeCast ChildCast Kit  mold making - for children under 10

$ 14.00

LifeCast ChildCast Kit mold making - for children under 10

With the materials contained in the ChildCast kit, beginners and professionals alike can create life-like sculptures with incredible detail on their very first attempt This child-sized version of the original Body Parts kit is 4 in. x 6 in. (10 cm x 15 cm) and contains everything you need to cast one hand or foot, a pair of hands, baby shoes, or a small sculpture. The mold is not reusable.




 

Amaco Moist Clay & Clay Flour 5 lb. box no. X-11 moist clay

Amaco Moist Clay & Clay Flour 5 lb. box no. X-11 moist clay

Amaco Clay Flour is a natural gray clay in dry form that mixes easily with water and fires to a light buff between cones 5 and 10. Exceptionally smooth, pliable, and suitable for hand modeling and wheel throwing. Amaco Moist Pottery is a natural grey clay in moist form that fires to a light buff between cones 5 and 10. Exceptionally smooth and pliable, suitable for hand modeling and wheel throwing. 5 lb. packages.

$ 3.47




 

Home Decor •  ArtistsMembersStoreSite Map

Join the artSparx community! Become a registered member now.

Capture your target market!
Advertise at artSparx and reach over 100,000 unique visitors per month!
artSparx Advertising Information

Become a link partner
Add features to your site! Free

Media Support Center

www.fiarde.com    www.gildedplanet.com   www.architecturalfx.com   www.ediblegold.com
 Copyright 2010 artSparx.com. Media Center Except as otherwise expressly permitted under law, no copying, redistribution,
retransmission, publication or commercial exploitation of material or concept are permitted without the express written permission
of artSparx.com and Copyright owner. Legal       San Francisco, Ca.   415.407.5097

DIY, home improvement, kitchen cabinets, tools, lighting, ceramic tile, home decor, kitchen design, gardening, home decorating,
patio furniture, paint, insulation, home improvement, fencing, appliances, plumbing, power tools, hardware,
home improvement, bathroom remodeling, kitchen remodeling, plumbing supply